Discover home improvement tips

Building Childrens Furntiture

In some cases plywood is more expensive than solid wood, but this is not usually the case. In fact, in the case of fine hardwood plywoods of 3/4-inch thickness, the...
Browse » Home » Children Furniture Ideas » Building Childrens Furntiture

In some cases plywood is more expensive than solid wood, but this is not usually the case. In fact, in the case of fine hardwood plywoods of 3/4-inch thickness, the price is usually less.

In any event, the home hobbyist usually finds that money-saving is not the important factor when he selects material for his project, since materials seldom exceed one-third of the value of the average cabinet or piece of furniture.

In almost all of his furniture projects, Bill Baker gears his instructions toward the use of plywood rather than solid wood, not only because of the factors of wood strength and outdoor durability, but also because of the simplicity in cutting out necessary pieces.

There is usually little waste, there are less operations required for the home hobbyist, and plywood is available in a very wide range of beautiful hardwoods. New techniques for edge treatment, such as Wood-Trim in matching veneers, also add simplicity to the job.

Duraply is plywood with a special over-lay surface; it is non-porous and is, therefore, easy and economical to paint. When finished, Duraply has a handsome appearance.

Nakora is the most handsome of economical plywoods for indoor furniture, particularly for modern furniture. Birch plywood is one of the strongest hardwood plywoods available and it is especially suited for colonial furniture. When it is stained-which it takes nicely without fill-ing-it can be made to resemble most any wood finish. Since it isn't porous, it lends itself very well to painting and is especially good for children's furniture.

Recommended Reading

  1. Building Childrens Furntiture
  2. ALTHOUGH there are many ways to build good furniture, some requiring skills and equipment well beyond the reach of the...
  3. Building Childrens Furntiture
  4. Screws driven into the end grain of ply-wood should be long enough to take a 3/4-inch bite into the wood....
  5. Building Childrens Furntiture
  6. To simplify construction procedure with-out sacrificing strength, dowel assembly is avoided in favor of screws and glue. Nails should never...
  7. Building Childrens Furntiture
  8. Some pieces shown in this book have rabbets or grooves that do not run the full length of the wood...
  9. Building Childrens Furntiture
  10. Having glued and joined all T's and L's, the next step is to assemble these joined sections together to complete...

Leave a Comment

Fields marked by an asterisk (*) are required.